Enlarge Image

 

Contact Us About Product
 

CSB-T90: Bronze wrapped with through holes

Structure

The bearings are wrapped from a cold formed homogenous bronze (CuSn8) with exceptional material properties. The standard sizes incorporate holes, which are dispersed in a special way over the whole bearing surface. These holes serve as lubricant reservoirs to rapidly build up a lubrication film at the start of movement and thereafter reduce the running friction. The material is suitable for construction and agricultural machinery etc. where high load and slow movement occur.

Feature

1. Easy of fitting and lubricate
2. High load capacity
3. Excellent wear resistance with lower friction
4. High level thermal conductivity
5. Minimum overall dimensions
6. Chemical resistance
7. Extended service life and lubrication intervals than normal CSB-090 type bearings
8. Free selection of lubricants
9. Collection of dust and rub off particles in the holes
Initial pre-lubrication at assembly is required...

Typical Applications

This type of bushing is widely applied in hoisting machines and other construction machines, automobiles, tractors, trucks, machines tools and some mineral engines. It can be fabricated into bushes, half bearings, flanged bushes, thrust washers, spherical bearing and so on.


BEARINGS PRODUCTS
Bi-Metallic Composite Bearings Metal Polymer Bearings Bronze Wrapped Bearings Metallic Self Lubricating Bearings Filament Wound Self Lubricating Bearings Injection Moulded Plastic Self Lubricating Bearings Quality
 
Product Image


Rugby Branch

6 Bilton Road, Rugby, Warwickshire. CV22 7AB
Tel: +44 1788 541551  |  Fax: +44 1788 541368
Email: marksmith@krfukltd.co.uk
 



Daventry Branch
Long March, London Road, Daventry. Northamptonshire. NN11 4NR
Tel: +44 1327 877355  |  Fax: +44 1327 877883
Email: enquiries@krfukltd.co.uk

|   Home   |   Contact Us   |   Bearings  |   Exhausts  | Privacy Policy

Copyright © 2009. All Rights Reserved | Designed and powered by JDR Group Web Design