Enlarge Image


Contact Us About Product

CSB-SNF: Powder sintered bearing


The base material for sintered parts such as sliding bearings or other formed parts are iron, bronze, iron with bronze and other metal in powder form. This powder is formed under high pressure in dies into a temperature which is just below the melting point. According to the work condition, the bearings can impregnate with different oil or solid lubricants for the self-lubricating. Sintered selflubricating bearings are the ideal and economical solution for applications where lubrication is difficult or lubrication could not be applied.


1. Good wear resistance with lower friction
2. Lower maintenance requirement
3. Lower the material cost for large production
4. High speed with lower noise
5. Can be machined again after installation if possible
6. Different structures could be available against special request


Inside Diameter ID: F7
Outside Diameter OD: r7
Flange Diameter: js13
Flange Thickness: js13

Bi-Metallic Composite Bearings Metal Polymer Bearings Bronze Wrapped Bearings Metallic Self Lubricating Bearings Filament Wound Self Lubricating Bearings Injection Moulded Plastic Self Lubricating Bearings Quality
Product Image

Rugby Branch

6 Bilton Road, Rugby, Warwickshire. CV22 7AB
Tel: +44 1788 541551  |  Fax: +44 1788 541368
Email: marksmith@krfukltd.co.uk

Daventry Branch
Long March, London Road, Daventry. Northamptonshire. NN11 4NR
Tel: +44 1327 877355  |  Fax: +44 1327 877883
Email: enquiries@krfukltd.co.uk

|   Home   |   Contact Us   |   Bearings  |   Exhausts  | Privacy Policy

Copyright © 2009. All Rights Reserved | Designed and powered by JDR Group Web Design